Tanning Buyers Group

Electrical Wiring for Salons

Electrical wiring for salons is a vital part of tanning salon setup. Wiring your tanning salon properly can save money short and long term.

During the planning stages you should create a floorplan and drawing that will be used as a template for Architectural drawings (new salons only) or as a guide when hiring professionals.

Determine what power will be needed and where. Make sure you have large power consuming and essential  devices such as tanning beds, blow dryers, laundry machines, HVAC, COMPUTERS on dedicated lines that will not be over capacity. Always put computer networks on a dedicated line with battery backup and surge suppression.

Remember the cleanest salon electrical installation is always the least expensive and easiest to upgrade. Make sure you keep the distance the wire is run as efficient as possible.

Wire Guage Standards

#16 Wire - 10 amp maximum draw

#14 Wire - 15 amp maximum

#12 Wire - 20 amp maximum

#10 Wire - 30 amp maximum

#8 Wire - 40 amp maximum

#6 Wire - 55 amp maximum

#4 Wire - 70 amp maximum

#2 Wire - 95 amp maximum

#0 Wire - amp maximum

#00 Wire - amp maximum

LOAD must never exceed maximum wire rating. Breaker must never exceed maximum.

This information is provided as a guide for your use when hiring a professional installer. It is not to be used in do-it-yourself applications. Consult a professional in your area and verify all the information contained prior to beginning any work.